| Name | Value | Unit |
|---|---|---|
| Film Thickness | nm | |
| Power | Watts |
| Name | Value | Unit |
|---|---|---|
| Base Pressure | 2.0E-6 | Torr |
| Commercial Rate | 160 | $/Hr |
| Gas Flow (Ar) | 40 | sccm |
| Gas Flow (N2) | 0 | sccm |
| Gas Flow (O2) | 1.3 | sccm |
| Gas Pressure (VAT Controlled Yes) | 5 | mTorr |
| Power Type | 1 | DC |
| Pre-Sputter Time | 1 | minutes |
| Pump Down Time | 40 | minute(s) |
| Sputter Rate | 4.75 | nm/min |
| Note | Date Modified | Author |
|---|---|---|
| ITO (4 In) is usually installed in C2. Needs Staff Approval. | 2025-11-12 19:17:14 | anonymous |
| The sputter rate is at 50W of power. A ratio is used when changing the power to give the expected deposition time. | 2025-01-24 16:00:52 | anonymous |